Fraud Blocker DC – Envirotex Blog

How a Mold Removal in Washington, D.C. is Properly Performed

The two most important things to remember about mold is first, to prevent it from growing in the first place by keeping a close eye on the things that trigger mold growth such as humidity and water leaks and make sure you have plenty of ventilation in your Washington, D.C. home. Second, if or when mold becomes present in your home in Washington, D.C., have a mold removal company clean up the mold right away.

Properly taking care of mold is essential at the source of moisture. Otherwise, it will keep coming back.

Moisture

When assessing mold growth, it requires more than just looking at what is visible to the naked eye. Mold can be invisible growing behind walls and under the carpet. You need to understand that mold growth is a water or moisture problem and then you need to know where the moisture is coming from and how it is getting into your home in Washington, D.C.

Extent of Mold Contamination

Knowing the extent of mold growth will determine the mold removal process and how to protect homeowners from large amounts of mold exposure.

Mold Removal

Mold removal by a professional environmental company in Washington, D.C. will always include cleaning up existing mold while avoiding exposure to oneself and the homeowner and his family as well. Preventing new mold growth by taking care of the moisture source within the home in Washington, D.C. is an important part of the mold removal procedure. The cleanup process should include:

• Repair the water problem
• Isolate the contaminated area
• Suppress the dust
• Remove materials
• Place materials in plastic bags
• Clean all affected areas
• Allow to dry
• Replace or repair materials

After the complete mold removal process, your home in Washington, D.C. should be tested by an environmental testing company to verify that all the mold has been removed from your home. When all molds have been removed properly, the homeowners should be able to move back into their home in Washington, D.C.

By implementing these guidelines when dealing with mold removal, you can be assured the necessary steps are being taken for the health of you and your family.

Regulations Behind Asbestos Removal in Washington, D.C.

Asbestos removal in Washington, D.C. is strictly regulated and can only be performed by specially-trained, licensed, and accredited environmental professionals. With over fifteen years of exceptional experience in asbestos removal in Washington, D.C. and Virginia, Envirotex Environmental Services is a highly-regarded provider of inspection, testing, analysis, abatement and removal of highly toxic asbestos-laden construction and other materials.

Asbestos licensing, permitting, and oversight is managed through the District Department of the Environment (DDoE). All property owners in the District of Columbia and providers of asbestos removal in Washington, D.C., must comply with the requirements of the Asbestos Licensing and Control Act of 1990, effective May 1, 1990 (D.C. Law 8-116; D.C. Code § 6-991 et seq.), as amended. Washington, D.C. follows asbestos removal standards published by the National Emission Standards for Hazardous Air Pollutants (NESHAP).

This regulation mandates that any asbestos areas larger than 160 square feet or 260 linear feet must be removed by a licensed professional, such as Envirotex. Asbestos flooring larger than 18 square feet requires a 10-day notification. The NESHAP notification form must be sent to the Air Quality Division of the D.C. Department of Health’s Environmental Health Administration. Projects smaller than NESHAP specifications do not require a 10-day notice or a permit.  In either case all OSHA worker protection standards apply along with federal EPA regulations on asbestos removal in Washington, D.C.

When you need asbestos removal you need a meticulous, well-trained, seasoned professional with appropriate coursework and training, valid licensing and up-to-date credentials. When you need asbestos removal in Washington, D.C., you need the trusted asbestos professionals at Envirotex.