Mold removal can be an intense process in Washington, DC. As something that we specialize in, mold removal is a big part of what we do. Understanding the entire process of mold removal in Washington, DC will help you get a clear idea of what happens when you call a professional mold removal crew. We thought it would be fun to do a short article about what an average mold removal process will go like during an ordinary visit. The following is a sample of a hypothetical situation in which we help a Washington, DC family with a complete mold removal.
Here are a few reasons why you should consider hiring a certified, licensed professional for mold removal in Washington, DC:
The first step of a mold removal is to thoroughly test the Washington, DC home and see how bad the situation is. Let’s say we received a call from a Washington DC homeowner who had discovered signs of mold in the restroom. The restroom was a smaller unit which also had a washer and dryer in it. We discovered that the fan was not working properly and because of this, water from the shower and the washer and dryer would remain in the room for hours and cause the walls to become damaged. During the mold testing we discovered that three different types of mold were present in that Washington, DC restroom.
We did this by using our thermal imaging technology to get a feel of how the mold removal will need to be done. This let us see that some of the mold had seeped into the back wall which would also need to be removed.
We knew that in order to perform a mold removal on the Washington, DC home, it would be best to have the family out of the home for a day or so to take care of the problem. After setting up a time for the following week that would work well for the Washington, DC family, the mold removal date was set. One week later, we showed up and the family had plans to be away from home for the following 10 hours. We knew that to complete the mold removal on time we would need to work fast.
The first thing that we did was to make sure that each of our crew members for the mold removal were properly equipped with the correct protective gear. According to our mold removal plan, which we had made with the homeowners during our prior visit, we would need to move the washer and dryer unit from the restroom and remove part of the wall.
After planning how we would remove all of the harmful materials, we set to work in cleaning up the area. Mold removal can be a tricky subject as you want to make sure that you have every single piece of it because even if you miss a little bit of mold it will grow into a bigger problem once again. So in order to completely make sure the mold removal would be a success in the Washington, DC home, we would need to remove every single piece of mold.
After cleaning up the wall and removing it, we set to work in clearing out all of the mold that was inside of the wall as well. This ended up taking longer than expected and when it was all finished we only had about two hours left until the family would be back home. Luckily we were able to complete the full mold removal process just within the amount of time that we had planned and we brought their Washington, DC home back to being a mold free zone once again.
This is a normal example of what the average Washington, DC mold removal looks like. We have performed the same process hundreds of times in houses all across the state. If you think that there may be mold in your home then it is essential to call a professional crew such as the crew at Envirotex to take care of the mold removal. This is because during the mold removal process a great amount of mold will be stirred up and that could be dangerous to be in if you do not have the correct protective equipment.
You may also be unaware of how deep the mold problem really is and you will not remove it all. In this case the mold will simply grow back once again and you will not have fixed the problem at all but instead only wasted your own time. For a thorough mold removal in Washington, DC there is no better way than to call the team at Envirotex. Envirotex is a company that has been serving residents of Washington, DC for many years and we know everything that is involved in a complete successful mold removal.
Everything that we do is based around protecting our Washington, DC customers so if you see any signs of mold at all in your home then you’re going to want to schedule a mold inspection. The mold inspection will give us an opportunity to check out how bad the problem is and together with you we will plan a time when we can perform the mold removal. We understand that you have a busy schedule so we always do our best to make sure that we find a time that works for you. In most cases we are able to take care of your mold removal even while you are away at work. Simply let us come in the morning and while you are working, we can be working on fixing your Washington, DC home and making it safe to live in once again.
We enjoy working with our Washington, DC customers because we know that once we are finished your home will be a better place to live in. If you think there is a problem with mold in your Washington, DC home and you may need a mold removal then please give us a call. We will always do everything in our power to take care of the problem for you.
About Envriotex Environmental Services
Established in Northern Virginia in 2000, Envirotex Environmental Services was founded on military service. While serving his country, the company's owner Mr. Freeman gained vast knowledge and experience in the environmental services field. His expertise in air monitoring and hazardous materials testing prepared him for his post-military career.
Get Your FREE
Envirotex Proudly Accepts
Listen to Our Clients
What can I say... Thank you! Your team arrived on time, treated my home with respect, finished the job on time and did what you said they would do. A++
I used Envirotex at one of my largest client properties, and was thoroughly pleased with their performance. Their service was prompt, and their analysis comprehensive. Follow up and responsiveness were also great. The president of the company personally addressed our questions. I would not hesitate to use Envirotex again.
The job was to remove all the old rock-wool insulation and 60-years of dust, bird droppings, and dirt from the attic so that new fiber glass insulation could be installed. Dan's team of workers did a super job in cleaning the attic of all this stuff. I could find nothing remaining between the joist or in corners of the attic. It was so clean that you could have food served on the floor in the attic. They were on-time, completed the work as scheduled, and the work team was professional, organized, and experienced. Highly recommend Envirotex.
Frederick R T.