If you own a home in Washington, D.C. then you understand that protecting it can be a long and difficult process. There are many different things that can affect your Washington, D.C. home and mold is just another one of the many. However, a mold inspection can be an important step to take before the problem gets out of control. Mold has been known to destroy homes all across Washington, D.C. and if you are not careful, it could ruin your home as well.
Envirotex is an reputable, licensed environmental services company performing professional mold inspection in Washington, D.C. We offer:
Mold contamination is often found in water damaged buildings, and it is a serious health risk that should be identified and removed. Envirotex is ready to help with your Washington, D.C. mold remediation plan and that begins with a full proper mold inspection.
Mold Examination Process
This mold inspection begins with a visual examination of the Washington, D.C. building and its HVAC system. Then we will collect air samples and analyze them in a microbial laboratory. At this point, we can develop a complete plan including method, scope, time and controls. In an emergency situation, we will remove all of the bacteria completely.
The mold inspection is the beginning of a long and tedious process in which we properly contain and remove all mold, water damage, and mold growth. We will test the mold in our certified lab to get an idea of how deep it may have spread. Often there are signs of site decontamination in various areas of your home in Washington, D.C. during the mold inspection.
Thermal Imaging Technology Helps To Identify Trouble Spots
We now have access to the latest highly efficient thermal imaging building diagnostic technology. This helps us a great deal during your mold inspection in Washington, D.C. because we are able to rapidly detect and identify sources of moisture that would support mold growth. In this way, our crew can develop an exact plan to go forward with in eliminating the conditions that will cause mold colonies to expand. This will essentially cut the mold off before it even has a chance to form.
Our infrared camera diagnostic system also can quickly detect sources of energy deficiencies, destructive water damage, and any existing structural issues which might contribute to the mold problem. This will all work together as a part of our mold inspection to make sure that we have access to the most complete amount of data possible. Ultimately it will lead to a healthier, happier, and more comfortable home.
Unlike in the past with our thermal imaging system, we can now handle the mold inspection in a more thorough and less destructive way than before. The entire inspection also takes a fraction of the time of what it used to in Washington, D.C. We have a large amount of experienced environmental professionals at Envirotex, and we are proud to be able to offer the latest in mold detection technologies.
In Need Of An Emergency Mold Inspection?
We understand that sometimes situations arise that could not have been foreseen. For example, if you are just about to open for another school year in Washington, D.C. and only have a few days remaining and suddenly mold is discovered, it might be time for an emergency mold inspection. Our company has handled many situations including emergency mold inspections in the past and we will be able to take care of you and perform a quick mold inspection on the spot. With our new technology that is available including thermal imaging, we are able to scan an entire room in just minutes. What previously could take hours and would require intense mold inspections is now possible in such a short amount of time.
As a company that always strives to provide the best service possible to its Washington, D.C. customers, we are proud of the fact that we have many different methods to handle a mold inspection these days. All of these various methods put together help to create a better picture of what the plan should be going forward.
Always Let A Professional Handle Your Mold Inspection
It can be tempting to run around the building searching out moldy spots yourself, but the chances are high that you will miss an important section in your Washington, D.C. home if you attempt this. Mold grows in damp spots and is not always readily apparent to the naked eye. It is essential that you cut the mold off before it forms as the spores that mold will generate can cause a good deal of harm to anybody who enters the area.
Our thorough mold inspection will discover all of the mold growth areas in your Washington, D.C. home which will give you the best chance at removing them and keeping your family safe. If you attempt to take matters into your own hands, you may end up causing irrevocable damage to you and your family. Many people who intend to do good actually board up moldy areas which only makes matters worse. As the mold continues to intensify in the dark corners of your Washington, D.C. home, it will be even harder to pick up during a mold inspection and yet will still be releasing toxic spores into the air.
Envirotex, a company that specializes in mold inspections in the Washington, D.C. area, is ready to help you with a professional team who is well-trained in the mold inspection field. For any questions about mold inspections in Washington, D.C. or if you would like to schedule an appointment, please do not hesitate to give us a call. We enjoy taking the time to talk with our Washington, D.C. customers, and we will make sure that all of your questions are answered to your satisfaction.
About Envriotex Environmental Services
Established in Northern Virginia in 2000, Envirotex Environmental Services was founded on military service. While serving his country, the company's owner Mr. Freeman gained vast knowledge and experience in the environmental services field. His expertise in air monitoring and hazardous materials testing prepared him for his post-military career.
Get Your FREE
Envirotex Proudly Accepts
Listen to Our Clients
Envirotex truly came to our rescue. With the discovery of asbestos during our current renovation project, we were faced with the possibility of a considerable delay. Envirotex's prompt response, competitive pricing and flexibility to work off hours prevented any schedule slippage.
Great customer service. Reviewed quite a few and found Daniel Freeman, Pres/CEO of Envirotex to be the most knowledgeable and professional of all. Also the most experienced! We would highly recommend this company. (He was very tolerant of all my questions about the inspection and how the treatment would be handled!)
What can I say... Thank you! Your team arrived on time, treated my home with respect, finished the job on time and did what you said they would do. A++