Why Asbestos Testing in Washington, D.C. is Recommended

Once acknowledged as exceptional for fireproofing and insulating in Washington, D.C. homes, asbestos is widely known as a dangerous fibrous material. When its fibers become airborne and these fibers are inhaled, it can cause havoc on a person’s lungs possibly causing mesothelioma, asbestosis and lung cancer.

It is hard to tell where asbestos could be in your home in Washington, D.C because it has been so widely used for a variety of products, so it could almost be in any room of your home. Popcorn ceilings are famous for containing asbestos as is drywall joint compound, floor tiles, and vinyl flooring. If you suspect that you might have asbestos in your Washington, D.C. home, there are numerous at-home asbestos testing kits that you can purchase, take samples and send to a lab. However, asbestos testing by an accredited professional is recommended by the EPA (Environmental Protection Agency) instead of using at-home asbestos testing for homes in Washington, D.C.

As long as asbestos is not disturbed, it will not harm you. However, any home built in Washington, D.C.before 1980 stands a good chance of having asbestos-containing materials and should have an asbestos testing performed before doing any remodeling. Asbestos fibers are odorless, tasteless and something you cannot really see.

Asbestos testing by a professional will safeguard your family against further exposure to asbestos. Once tested and confirmed by an asbestos testing professional that your home does have asbestos-containing materials, removing asbestos from homes in Washington, D.C. should also be done by a professional asbestos abatement contractor who is trained to properly seal off areas to avoid spreading asbestos dust throughout the house. These professionals in Washington, D.C. have the proper equipment to clean the air during the removal process. They also wear protective gear which is required by OSHA to keep themselves safe.

Before you put your family at risk, call an asbestos testing professional to check your home in Washington, D.C. if you are uncertain that a particular material contains asbestos. It is better to be safe than sorry. You should never take it upon yourself to remove asbestos. This should be left to an environmental service company who is experienced in asbestos removal and who knows how and where to properly dispose of asbestos-containing materials.

How are Mold Inspections in Washington, D.C. Conducted?

When properly diagnosing a mold or indoor air quality problem, a mold inspection company in Washington, D.C. should always ask a homeowner about any current or previous issues including moldy odors, plumbing leaks, past or present roof leaks, humidity or condensation problems or if there is any visible mold present.

Visual Inspection for Mold

Mold inspections consist of a complete visual inspection of your home conducted to search for visible mold growth or possible water penetration and other problematic conditions. Moisture meters for detecting moisture, hydrometers for measuring indoor humidity, boroscopes for viewing inside the walls, and laser thermometers to check surface temperatures and the operation of AC units may be used during mold inspections at homes in Washington, D.C. Also, digital photographs might be taken to document the condition of your Washington, D.C. home.

Mold Sampling

Sometimes a mold condition cannot be visually seen but can be detected by taking air samples. As part of conducted mold inspections, samples are taken indoors and outdoors to determine if the mold spore count filtered through the air inside is higher in comparison to the mold spore count filtered from the air outside the home. It can tell you which types of mold are on the property.

Surface-lifted samples of mold are taken by scraping mold from building material surfaces with the aid of swabs or clear tape. Bulk samples may be taken by cutting samples from building materials that are contaminated with mold.

Analysis of Mold Samples

A professionally trained analyst analyzes these samples collected by the mold inspector at a specialized lab. A mold inspection report is provided with the results of the samples taken at your home in Washington, D.C.

Mold Report Information

A written report of the findings from the mold inspection will include color digital photos, spore levels and types of mold. This report will be sent to you with a recommendation of the procedure that needs to be conducted to remove the mold from your Washington, D.C. home. At that time, you should call an environmental service company and immediately have all mold removed from your home in Washington, D.C.

Some molds can be toxic and cause health issues for you and your family, so you want to get rid of all molds as soon as possible. Once the mold has been professionally removed from your Washington, D.C. home, you should have another mold inspection conducted to verify all mold is gone.